Porter-Cable Tool Reviews with Hands-on Tests

September 27, 2011 0

Porter-Cable PC60TPAG Angle Grinder Cut-Off Tool Preview

This week Porter-Cable announced a couple of new products due out in October of this year (next month), including their new PC60TPAG 7-amp 4-1/2″ Small Angle Grinder and Cut-off Tool. The new Angle Grinder really seems to benefit form some of the advances the company has made with its cordless tools. In particular, the tool is lighter and more agile than its predecessors and it delivers excellent performance while still maintaining an ergonomic form factor.

September 27, 2011 0

Porter-Cable PC70THD 1/2-inch Hammerdrill Preview

by Clint DeBoer

When Porter-Cable announced it had launched a new 7-amp 1/2″ 2-speed hammer drill (PC70THD) we perked up our ears. The tool is designed to take advantage of new power-to-weight ratio advantages in motor and transmission technology and apply that to the corded tools that so often lag behind their “updated every 9 months” cordless brethren. The new corded hammer drill seems to really target pros who are looking for an ergonomic rotary hammer drill driver that doesn’t cost a fortune, but isn’t slack on performance.

September 20, 2011 0

Porter-Cable PCC581B 18V Infrared Thermometer Preview

by Clint DeBoer

Porter-Cable launched a couple of brand new Infrared Thermometers, the 18V-powered PCC581B and the 9V-powered PCC582B. These infrared thermometers are very different from the ones we’ve seen in the past, incorporating a three-color indicator beam that indicates changes in temperature visually. When you pull the trigger, the thermometer takes a reference temperature reading while it paints a green circle beam onto the surface at which it is aimed. The colors change when a difference in temperature is detected as it is scans across an area. A blue beam identifies a cool spot, and a red beam shows a hot spot.

September 16, 2011 0

Porter-Cable PC180CHDK-2 18V NiCd Hammer Drill Preview

by Clint DeBoer

Porter-Cable today launched the NiCd-based PC180CHDK-2 18V Hammer Drill. While not based on the new Li-ion platform, the new drill is designed to give general contractors, plumbers, electricians, woodworkers, etc, more power and performance over Porter-Cable’s current line of hammer drills. The PC180CHDK-2 18 Volt NiCd Hammer Drill is more compact and delivers greater beats per minute than the older model it replaces (the PC180HDK-2). The new tool uses 1.5 Ah, 18V NiCd batteries and is a 2-speed model, running at 0-350 and 0-1,500 RPMs. The hammer drill anvil mechanism delivers up to 25,500 blows per minute (bpm) and the tool delivers a full 424 in-lbs of torque at max potential. This hammer drill seems perfectly suited for heavy-duty applications like concrete, brick and mortar block drilling. The tool includes an all- metal chuck and weighs just over 5 pounds. From tip to back it measures 9″ in length which, for a hammer drill, means that you’ll be able to insert it into some pretty compact areas.

September 16, 2011 0

Porter-Cable PCL180CDK-2 18V Li-ion Drill Kit Review

by Clint DeBoer

Porter-Cable has been upgrading its initial line of 18V tools that are both forward and backwards compatible with their entire line of 18V NiCad and Li-ion batteries. The new PCL180CDK is Porter-Cable’s second-generation 18V drill, this time compact in nature and making use of their latest Li-ion batteries. We tested it on a variety of products and really liked how Porter-Cable seems to be bringing a lot of innovation from some of its sister companies to bear in its more affordable models. The result seems to be less expensive tools that have a high degree of build quality and features. While we were surprised to find it still missing some of the more common features like battery-level indicators, yet the PCL180CDK remains a very well-engineered, lightweight tool that is a great addition to the Porter-Cable 18V lineup.

September 5, 2011 0

Porter Cable PC60TCTAG 4-1/2 Inch Cut-Off Tool and Angle Grinder Kit Review

by Matthias Gaige

The Porter Cable PC60TCTAG 4-1/2 Inch Cut-Off Tool and Angle Grinder Kit comes equipped to tackle just about any grinding or metal cutting project you can throw at it. Given that two different blade guards are included, one that is optimized for grinding and the other one for cutting, you can be sure that not only can to complete the task at hand but also do it safely. Just to sweetened the deal and get you started on your projects they threw in 5 general purpose grinding wheels and 5 cut off wheels in the box! With 6 amps of power, a compact size and a rock bottom price, we are pretty sure that this is angle grinder combo pack is a winner.

May 31, 2011 0

Porter-Cable PC250MTK Oscillating Multi-Tool Kit Review

by Thomas Gaige

With just about every tool manufacturer making oscillating multi-tools now, almost everyone has one. If you have been one of the few holding out for other options like a tool-free blade change system, you are now in luck – Fein’s expensive FMM-250Q Top system isn’t the only game in town. You need to check out the new Porter-Cable PC250MTK Oscillating Multi-Tool Kit. This new tool from Porter-Cable has what might be an even better tool-less blade change system than the original from Europe. With this new convenience comes the catch that for now you can only use the Porter-Cable blades and accessories.

April 18, 2011 0

Porter-Cable PC85TRSOK Tiger Saw Review

by Matthias Gaige

The Porter-Cable PC85TRSOK 8.5Amp Orbital Reciprocating Tiger Saw comes ready to cut or rip through just about anything thanks to its ability to switch from reciprocating to full orbital action. Many tradesman might remember the original Tiger-Saw and know that it was a tool to be reckoned with. The big question for us now is if this new lightweight model can live up to its predecessors. Things like an adjustable shoe and a powerful motor are a good start for sure. At first glance this tool seems to be a great bargain because it is high on features and low on price, but before we can recommend this new breed of Tiger Saw we have to spend a little quality time with it just to see how tamed (or rather untamed) it is.

Porter-Cable 450PK 1.25 HP Compact Router Combo Kit

April 12, 2011 0

Porter-Cable 450PK Compact Router Combo Kit Review

by Thomas Gaige

The Porter Cable 450PK 1.25 HP Compact Router Combo Kit brings a breath of fresh air to the compact router market with plenty of power, quality features and woodworking versatility built in. We were impressed that this pint sized router packs a punch and does a fantastic job at a wide variety of router tasks. Combined with an all machined aluminum body, aluminum fixed and plunge bases, and a very positive depth of adjustment system; we found that a high level of precision can be attained. Thanks to its lightweight construction, and compact size, many trimming, edge round-over and chamfer type cuts can be made with ease and control that can be more difficult to do with a full sized tool. Sure there are instances when a larger sized router is needed but we would bank on the fact that most casual woodworkers and even professionals would benefit from the compact size of this router. We find it pretty easy to recommend the Porter Cable 450PK 1.25 HP Compact Router Combo Kit to anyone.

April 7, 2011 0

Porter-Cable PC60THPK 6-amp Hand Planer Preview

by Clint DeBoer

Ever wish your electric planer had a longer stance and better dust collection? Porter-Cable is attempting to meet those needs with its new 6 amp Hand Planer (model #PC60THPK). The brand new planer is actually rather sleek, with a raked back profile and 3 chamfer grooves. The new motor, which is reasonably powerful for those looking to do significant hand planing for finish applications, comes up with 16,500 RPMs. At first glance this planer seems perfect for planing wood planks, shortening doors and joists, and also chamfering and profiling the corners and edges of various hardwoods. The part we liked, however, was that it could chunk out up to 5/64″ per pass. For those who have trouble with fractions, that’s a little over 1/16 of an inch – not terribly deep by planing standards, but this is an instrument meant for finer work, not something with which to replace your circular saw. The planer comes with two blades and you can use either high-speed steel (HSS) or carbide blades. HSS blades are perfect for more aggressive planing – where nails might be encountered, and carbide blades are your tools for finish carpenters or craftsman who don’t risk jamming them up on anything except wood.

Manufacturer: Porter-Cable