Makita Corded 1-3/16-inch Rotary Hammers Feature a Design to Increase Accuracy
Makita just launched two 1-3/16-inch corded rotary hammers to increase the accuracy and ergonomics for concrete formers, plumbers, electricians, HVAC techs, ironworkers, and general contractors. The SDS-Plus HR3001CK and HR3011FCK rotary hammers feature a niche size in the market at 1-3/16″, and they feature an L-shape design that makes these tools more accurate and comfortable to use.
Makita 1-3/16″ Rotary Hammers
The Makita Rotary Hammers carry a nearly identical feature set. In addition to the SDS-Plus chucks that accommodate the somewhat unusual 1-3/16″ bit size, both have three modes of operation: “rotation only”, “hammering with rotation”, and “hammering only”. While set to the hammer-only mode, you can set the bit angle at a variety of positions.
Both Makita rotary hammers draw 7.5 amps, cranking out 3.9 J of impact energy and providing up to 4,500 blows per minute. In either of the rotation modes, you can expect a no-load speed of up to 840 rpm. Both of the Makita 1-3/16″ Rotary Hammers feature Constant Speed Control, which automatically applies additional power to maintain speed under load.
Makita HR3001CK vs HR3011FCK
While both models feature a vibration-absorbing rubberized grip, the HR3011FCK has the benefit of Makita’s Anti-Vibration Technology. In our experience, this internal counterbalance system does a great job of killing a lot of the vibration that can plague these hard-hitting tools.
The inconveniently-named HR3011FCK can also work with the DX10 on-board Dust Extractor. This addition can bring the rotary hammer into OSHA Table 1 compliance. The HR3001CK doesn’t give you this option, however.
Finally, both of the Makita 1-3/16″ Rotary Hammers feature large, multi-finger variable speed triggers and an LED work light.
| Model | HR3001CK | HR3011FCK |
|---|---|---|
| Max Hole Size | 1-3/16″ | 1-3/16″ |
| Amps | 7.5 amps | 7.5 amps |
| Impact Energy | 2.9 ft. lbs. | 2.9 ft. lbs. |
| No-Load RPM | 0 – 840 RPM | 0 – 840 RPM |
| Blows per Minute | 0 – 4,500 BPM | 0 – 4,500 BPM |
| Constant Speed Control | Yes | Yes |
| On-Board Extractor | No | Yes (DX10 sold separately) |
| Anti-Vibration Technology | No | Yes |
| Vibration Measure | 16.5 m/s2 | 9.5 m/s2 |
| Bit Type | SDS-Plus | SDS-Plus |
| Length | 14″ | 14″ |
| Cord Length | 8.2 ft. | 8.2 ft. |
| Weight | 9 lbs | 9.7 lbs. |
| Warranty | 1 year | 1 year |
| Price | TBA | $319 |
Pricing
While the HR3001CK seems like it might take a while longer to make it to shelves, you can find the HR3011FCK rotary hammer now. It retails for $319. Both of the Makita 1-3/16″ corded rotary hammers come with a 1-year warranty.
For more information about the Makita Rotary Hammers, click here.
