Tool Reviews Archives

May 31, 2011 0

Porter-Cable PC250MTK Oscillating Multi-Tool Kit Review

With just about every tool manufacturer making oscillating multi-tools now, almost everyone has one. If you have been one of the few holding out for other options like a tool-free blade change system, you are now in luck – Fein’s expensive FMM-250Q Top system isn’t the only game in town. You need to check out the new Porter-Cable PC250MTK Oscillating Multi-Tool Kit. This new tool from Porter-Cable has what might be an even better tool-less blade change system than the original from Europe. With this new convenience comes the catch that for now you can only use the Porter-Cable blades and accessories.

Rockwell RK1001K2 12V Drill & Impact Driver Combo Kit Review

May 31, 2011 0

Rockwell RK1001K2 12V Drill and Impact Driver Combo Kit Review

by Thomas Gaige

In our testing and review of the Rockwell RK1001K2 12V Drill & Impact Driver Combo Kit, we found it to offer a good combination of both value and performance. With a myriad of different manufacturers coming out with 12V lithium-ion powered cordless tools it can be hard to determine what ones are the best to pick. If you are on the market for a 12V lithium-ion combo set, we think that the Rockwell RK1001K2 Drill and Impact Driver Combo Kit is worth a look. These tools offer performance that is comparable to many leading brands and, as a bonus, they come with a full three year warranty and a program where they offer free replacement batteries for life if you register your tools.

May 31, 2011 0

Milwaukee 2460-21 M12 Cordless Lithium-Ion Rotary Tool Review

by Thomas Gaige

With only a few manufactures offering cordless rotary tools, the Milwaukee 2460-21 M12 Cordless Lithium-Ion Rotary Tool is a welcomed addition, especially if you have other M12 tools and batteries. The specifications of this new rotary tool are right in line, if not better than, some of the other offerings on the market. Combine this with the well-proven M12 RedLithium batteries and you will have a tool that can be used for your weekend hobbies as well as on the job site. The Milwaukee Rotary Tool comes with a standard 1/8″ collet which will make it easy to use with the plethora of bits and blades that are widely available.

May 26, 2011 0

Maxxeon WorkStar 220 Pocket Floodlight Review

by Thomas Gaige

To say pocket and floodlight together sounds a little bit like a misnomer but the guys over at Maxxeon pulled it off with their new WorkStar 220 Pocket Floodlight. This little flash light is hardly bigger then a pen but features a Cree LED that puts out 120 lumens. With the included pocket clip you can put it in your shirt front pocket and you can almost forget it is there until you need it because it only weighs an ounce. With no hot spots or shadows, the light beam has a 1:1 ratio – meaning that for every foot you are a way from an object, the diameter of the beam grows by one foot. Step 20 feet away and you are lighting up an entire room with this baby.

May 26, 2011 0

Johnson Level 40-6064 Digital Angle Locator Review

by Thomas Gaige

The new Johnson Level 40-6064 Digital Angle Locator takes all the guesswork out of finding odd angles in the field thanks to a working range of 0 to 222 degrees and a built in miter calculator. In the past we would have relied on some fancy guesswork or trial and error to get angled cuts to match up, which usually resulted in wasted material or time. With an easy-to-read digital display, three button control and accuracy to within .5 of a degree, it should be a cinch to calculate the trim pieces needed for that bay window or octagon shaped ceiling cove. As my old boss used to tell me, ‘measure twice, cut once’. Well, that’s a whole lot easier now with angles and miters calculated more precisely and quickly with the Johnson Digital Angle Locator.

Milwaukee M12 Cordless Heated Jacket Review

May 18, 2011 0

Milwaukee Heated Jacket Review

by Matthias Gaige

The new Milwaukee 58-38-2011 M12 Cordless Heated Jacket Kit features a water and wind resistant outer soft shell and there are sewn-in carbon fiber heating zones that will ensure that you stay comfortably warm in cold weather. The heat can stay on continuously for up to 6 hours and power for the heating zones comes from a M12 Red Lithium battery that fits inside a small pocket that is located out of the way. This jacket looks great and was comfortable to wear all day long, both on and off the job site. a great addition to the M12 line of tools. It is also demonstrated to us that it is very versatile in a variety of weather conditions thanks to the three built in heating zones and its overall wind and water resistant properties.

May 18, 2011 0

Echo CS-400 Chainsaw Review

by Clint DeBoer

Reviewing a chainsaw can be a little tricky. We have found that people treat chainsaws and their brands like they […]

May 18, 2011 0

Makita 12V Impact Driver WT01W Preview

by Clint DeBoer

A sneak peek of Makita 12V Impact Driver WT01W. Please see our full review of the Makita LCT307W Cordless Lithium-ion Combo […]

Recharge 36V Cordless Riding Mower Preview

May 11, 2011 0

Recharge 36V Cordless Riding Lawnmower Preview

by Clint DeBoer

The G1-RM10 Recharge Mower has been under development for over 3 years. The 36V battery-powered riding lawn mower delivers up to three hours of continuous cutting and driving – and all this without gas, oil, or emissions. What’s really impressive is that the mower sports a fairly compact size, easy maneuverability, adjustable cutting height, and a large (3 bushel) grass catcher. The Recharge Mower seems perfectly suited for just about every lawn. On top of that, it’s actually pretty ergonomic, so it’s also great for those who may have physical disabilities (it has an easy-access seat). Now the people behind the Recharge Mower wee going for the “truly” green mower. The Recharge uses three eco-friendly electric motors and, of course, it emits absolutely no carbon emissions.

May 10, 2011 0

Panasonic EY7450LR2S 18V Li-ion Drill Driver Kit Preview

by Clint DeBoer

We got a sneak preview of Panasonic’s new IEC-rated EY7450LR2S 18V cordless drill driver at this year’s IBS Show in Vegas and were impressed by the company’s tough talk. Today, Panasonic announced the introduction of four of its new 18V Li-Ion cordless power tools. The new tools will be part of the company’s Tough IP line of professional-grade products. All feature IEC (International Electro Technical Commission) rated dust and water resistant technology and will be available this month. The four introduced models (which seem to be debuting overseas before they hit the US market) include a 1/2″ drill and driver kit, an impact wrench kit, an impact driver kit and a hammer drill/driver kit. All of the new 18V cordless models can be charged for use in 50 minutes with a full charge at 65 minutes, and feature Panasonic’s high capacity 3.3Ah Li-ion battery, LED work light, belt hook, and molded case.