Senco SLS150Mg 18 Gauge 1/4″ Crown Stapler
The Senco SLS150Mg 18 Gauge 1/4″ Crown Stapler arrived in late 2013 and continues to impress. The compact and lightweight […]
Ryobi P320 Airstrike 18V Cordless Brad Nailer
I’ve been wanting to get my hands on the new Ryobi P320 AirStrike 18V brad nailer since it came out. […]
Senco Portable Air Compressors
Senco has developed a pair of compressor lines—the 200 PSI Senco Portable Air Compressor Line and the Lightweight Senco Portable Air […]
Senco FinishPRO 23SXP and 23LXP Pin Nailers
We don’t see a ton of new pin nailers hit the market, so when one does, it’s an attention-grabber. That’s […]
Titan Impact 640 Electric Airless Sprayer Review
Last month I was able to review a new Briggs & Stratton pressure washer which, as a professional painter of […]
Ridgid Tri-Stack Air Compressor Review
The Ridgid Tri-Stack air compressor is a star performer in the brand’s line of inventive compressor designs. At first glance, […]
Paslode CR175C Cordless Roofing Nailer Review
As we’re fond of doing from time to time, we’ll take a tool and put it into the hands of […]
Bostitch Smart Point Brad Nailer Review
In the world of pneumatic nailers there’s not much that excites me anymore, unless we’re talking about brad nailers and […]
DeWalt DWFP12658 15-Degree Coil Roofing Nailer Preview
The DeWalt DWFP12658 15-Degree Coil Roofing Nailer weighs just under 5 lbs (4.85) and is designed to be a versatile […]
Porta-Nails 470A Pneumatic Flooring Nailer Review
Having both refinished and laid my share of flooring, going from a manual nailer to a pneumatic is a bit of a jump – but a welcome one. As anyone who has done flooring knows, the two tools work in basically the same way, but with one exception. With a manual flooring nailer, the very act of beating on the rubber ram cap drives the ratcheting mechanism which sends the cleat into the wood until it’s all the way in. With most decent floor nailers, the ratchet will then reset when the nail is at the correct depth. Porta-Nails’ 470A Flooring Nailer is a pneumatic model which uses 89-90 PSI of air pressure to drive the nail into the flooring with a single, less-aggressive strike.