Over the last year, DeWalt has introduced some really innovative tools, including two new battery evolutions. So, which ones made us say “Wow!” over and above the rest? I’m diving into some of the coolest new tools from DeWalt that we think you ought to know about as we head into 2025!
DeWalt 20V XR 8Ah PowerPack Battery
DeWalt is launching a new generation of core tools powered by a brand-new 20V Max battery. We’re going to cover many of the latest new tools, but let’s start with the power source that most of these new tools were built around—PowerPack.
The PowerPack battery is an 8Ah tabless design optimized to deliver more power in a smaller package with significantly less heat buildup. Unlike pouch cells, initial tabless design are making use of the more traditional cylindrical battery cells. The tab on other cells is a cause of significant electrical resistance and by going tabless, you’re able to get more power with less heat and extend the service life of the battery.
The more efficient power source is packed into an impact-resistant overmold, and the size of this new 8Ah battery is identical to DeWalt’s standard 8Ah pack. We expect to see many of DeWalt’s flagship tools kitted with these PowerPack batteries in the future, and indeed, many of the tools I’m going to cover below do just that!
These battery packs are available now. Single batteries are $229, or there’s a two-pack for $329.
20V Max XR 3-Speed 1/2-Inch Hammer Drill DCD1007
First in the new generation of core tools is the DeWalt DCD1007 1/2-Inch 3-Speed Hammer Drill. Compared to its predecessor, the FlexVolt Advantage DCD999, DeWalt boosted the power from 1,219 Max watts out to 1,530 Max watts out. The max hammer rate stays the same at 38,250 BPM. However, you’re losing a bit of speed with this new model. The DCD999 tops out at 2250 RPMs, while the DCD1007 only reaches a max speed of 2000 RPMs. The plus side is that you’re getting noticeably more torque at that lower speed, so we don’t mind the drop.
You get three speeds and eleven clutch settings with a foot-mounted LED light on the foot of the tool. DeWalt also built in their Perform and Protect Anti-Rotation system to prevent kickback if the bit binds up. The technology senses the rotational motion of the drill and shuts it down if that motion is too excessive or sudden. A red LED lights up at the foot of the tool when it goes into “shutdown mode.”
This drill is available for $249 as a bare tool and $349 as a kit with an 8Ah Power Pack battery and a charger.
20V Max XR High-Torque Impact Driver DCF860
Upgrading DeWalt’s impact driver lineup is the 20V XR High-Torque Impact Driver. The DCF860 is an upgrade on all fronts, emerging as the standalone flagship impact driver in DeWalt’s lineup. If you’re upgrading from the popular DCF887, you’ll see boosts from 4200 IPM up to 4500 IPM on the impact rate, a speed increase from 3400 RPM to 3800 RPM, and an absolute monster jump in torque from 1825 in-lbs to 2500 in-lbs!
The DCF860 comes equipped with a standard 1/4-inch hex collet that quickly connects with standard impact-rated bits and accessories. This impact driver features nine built-in LEDs that surround the hex collet and a 20-minute work light mode to provide extra light on the job site.
This impact driver also comes Tool Connect ready, so you can plug in the chip (sold separately) to add the asset management and tracking capabilities of the Tool Connect app.
Grab this one as a kit or a bare tool. The kit comes with an 8Ah PowerPack battery and a charger for $319. If you already have DeWalt 20V batteries, the bare tool is $199. Also, check out the DCF870 hydraulic driver if you want a quieter tool with similar features.
20V Max 7 1/4-Inch Circular Saw DCS590
New for 2024, DeWalt has their latest 20V Max XR Circular Saw, the DCS590. This model is positioned as DeWalt’s new flagship circular saw and has the ability to make up to 368 cuts per charge using an 8Ah PowerPack battery!
The brushless motor pushes 1700 UWO and turns the blade up to 5500 RPMs. The saw features a maximum cut depth of two 2-9/16 inches at 90°, and 2 inches at 45°. Additional features include a blade brake, LED light, integrated rafter hook, and Tool Connect capabilities. It’s also compatible with DeWalt’s AirLock dust extractor attachment or any standard 35mm dust extractor hose.
Keep an eye out for our review. DeWalt’s DCS578 took the crown as the most powerful circular saw we’ve ever tested, and we’re anxious to see how the new DCS590 compares.
Get your hands on this one for $349 as a kit with an 8Ah PowerPack battery or $249 as a bare tool.
20V Max Brushless Reciprocating Saw DCS384
Rounding out DeWalt’s new wave of next-generation core tools is the DCS364 20V Max XR Brushless Reciprocating Saw. DeWalt claims this is its fastest-cutting reciprocating saw with a 1 1/8-inch stroke length and operating at 3000 SPM. They also say to expect up to 102 cuts per charge with the kitted 8Ah PowerPack battery.
We’re intrigued by the promise of advanced vibration control in this new model since that was one category where DeWalt hasn’t excelled in past testing. They say that the DCS384 is using a new internal counterbalance mechanism designed to limit vibration when cutting through a variety of materials. We definitely look forward to experiencing that for ourselves!
If memory serves me correctly, this is the longest-standing core tool of the bunch to be replaced. That said, it’s still missing an orbital action mode and a variable speed switch. These features have become the norm among the best cordless reciprocating saws.
This saw retails for $349 as a kit that includes an 8Ah PowerPack battery, charger, and a storage bag. For $100 less, you can get the bare tool at $249.
20V Max 2 1/4 HP Plunge Router DCW620
The DeWalt 20V Max XR Plunge Router features a brushless motor that handles bits up to 2-1/2 inches in diameter and is in the same power class as 2 1/4 HP models. Its variable speed dial lets you dial in performance from 11,000 RPMs all the way up to 23,000 RPMs on the top end.
It features an integrated AirLock dust collection port, plus an Anti-Rotation system to keep you safe in case of an accidental bind-up. The DCW620’s three-position adjustable turret stop makes for quick depth adjustments, and the tool-free plunge lock lever quickly engages or disengage the lock without having to take your hands off the handle.
The router is available now for $349 as a bare tool. As of right now, it’s not available as a kit, so be sure to pick up a battery and charger if you don’t already have them!
20V Max Framing Nailers: DCN920 and DCN930
DeWalt updated its framing nailer lineup with a 21° Plastic Collated Framing Nailer and a 20V 30° Paper Collated Framing Nailer for the 20V Max battery system.
The design team made significant improvements to their internal flywheel mechanism, keeping the tool active even after the trigger is released. You’re now able to fire faster with almost zero firing delay, which has been a pain point on previous models. Compared to those previous models, DeWalt says these new nailers get up to 72% more sub-flush driving capability. That’s a substantial power improvement, especially when working in dense materials, like LVL.
DeWalt states that these nailers can install up to 530 sqft of subflooring or complete up to 100 feet of wall framing, all while using a standard 5.0Ah battery. It would be interesting to see what kind of runtime gains you could get if you threw in one of the 5.0Ah PowerStack batteries with its higher efficiency.
Another noteworthy feature is the introduction of extended magazines, the DZN 920 and the DZN 930, which are sold separately but are definitely worth considering. These magazines are made from high-strength magnesium and can hold two strips of nails, reducing the need for frequent reloads.
Both models retail for $379 as a bare tool, and $479 as a kit. The kits include a standard 5.0Ah battery, charger, and a storage bag.
20V Max Band Saws: DCS379 and DCS378
Earlier this year, DeWalt released two bandsaws to their 20V lineup—the Mid-Sized Bandsaw (DCS378), and the Dual-Trigger Bandsaw (DCS379). Both models are engineered to tackle tough cutting tasks quickly and efficiently, and their size is perfect for cutting conduit, unistrut, and rebar on commercial sites.
These band saws feature a brushless motor capable of delivering up to 535 UWO, and speeds up to 570 SFPM. With that kind of performance, these cordless band saws can slice through 12-gauge strut in just over five seconds!
The large 3 3/8-inch cut capacity means they’re versatile enough to handle a broad range of applications.
The dual-trigger bandsaw adds an extra layer of control and safety with its Perform and Protect auxiliary handle housing a secondary trigger. This allows precise control over the tool while also enhancing safety.
DeWalt’s DCS378 retails for$319 as a bare tool and $459 as a kit. The Dual-Trigger DCS379 is available for $379.99 as a bare tool and $529.99 as a kit. Both kit options include a 5.0Ah battery, charger, and storage case.
PowerShift Battery System
To wrap things up, I want to share a little bit about DeWalt’s latest heavy-duty battery platform. The Power Shift system’s initial focus is on replacing gas equipment without sacrificing power and dependability.
The power source at the heart of the system is a 554Wh battery. While DeWalt isn’t focusing on the voltage, we’re confident it’s a 60V Max system. The biggest FlexVolt battery currently available is a 300Wh, 5Ah pack, giving the Power Shift battery an 85% increase in capacity.
Of course, the Power Shift system’s focus on larger equipment suggests this battery is capable of producing more watts and not just more runtime.
With the launch, there are six products targeting the concrete sector and emphasizing power, runtime, and ergonomics. Here’s a quick look at the starting lineup of the DeWalt PowerShift tools!
Plate Compactor (DCPS7154)
This plate compactor features a 15.7-inch plate and 3,370 foot-pounds of force. The design includes ergonomic controls and a folding handle for portability.
60Kg Rammer (DCPS660)
The rammer offers 2,660 foot-pounds of force and features vibration-reducing insulators. Its two-position handle houses the controls for ergonomic use.
Backpack Concrete Vibrator (DCPS310)
Including the Power Shift battery, this backpack vibrator weighs just 25 pounds. It has a roll cage for protection and a high-visibility harness for safety. This backpack vibrator is compatible with a wide range of DeWalt’s quick-change heads and shafts.
Power Pack Vibrator (DCPS320)
This vibrator sits on the ground or can be carried by a second person, reducing the operator’s burden. It features DeWalt’s wireless Tool Connect for remote activation and a shoulder strap for transport.
Power Screed (DCPS330)
The power screed has adjustable handles and controls that mount on either side, making it highly customizable for user preferences.
Core Drill and Stand (DCD 150 and DCPS 151)
The core drill is part of DeWalt’s Perform and Protect lineup and includes bind-up protection for safety. Its compact size is ideal for close-to-wall or ceiling applications. Pairing it with DeWalt’s 20V Max water supply eliminates the need for dragging hoses around.
